Q: How do I become an Xfloor Applicator Partner?

Submit an application through our Applicator Programme page. Our Operations Manager will contact you within 48 hours to schedule a vetting call. Approved partners receive preferential pricing, technical training, and project lead referrals.

Q: How do I request a TDS or MSDS for a specific system?

All current technical documents are available on request from our technical team. Contact us and we will respond within 4 hours with the relevant TDS, MSDS, and application guides.

Question 1

What is the difference between epoxy and polyurethane floor coatings?

Accepted Answer

Epoxy systems offer superior adhesion and compressive strength, making them ideal for heavy industrial environments. Polyurethane (PU) systems have higher flexibility and UV resistance, making them better suited for outdoor areas, car parks, and zones with thermal cycling. Most high-performance installations use epoxy as the body coat with a PU topcoat.

Question 2

How long does an Xfloor coating take to cure before foot traffic?

Accepted Answer

Foot traffic is typically permitted after 24 hours at 25°C. Full chemical resistance is achieved after 7 days. Cure times vary with ambient temperature — lower temperatures extend cure time. Our technical team will advise based on your site conditions.

Question 3

Are Xfloor systems FSSAI and HACCP compliant?

Accepted Answer

Yes. The Xfloor Hygienic Series (SYS-401) is specifically formulated for food processing and pharmaceutical environments. Full FSSAI compliance documentation and HACCP certifications are provided before project commencement.

Question 4

What surface preparation is required before application?

Accepted Answer

Concrete substrates must be prepared to a CSP 3–5 surface profile using diamond grinding or shot blasting. Moisture content must be below 75% RH. Our application teams carry out a full substrate assessment before any coating is applied.

Question 5

Do you supply across all of India?

Accepted Answer

Yes. Xfloor supplies and supports application across 18+ states through our certified Applicator Partner network. Contact us with your project location and we will connect you with the nearest certified team.

Question 6

What is the minimum order quantity?

Accepted Answer

Pack sizes are available from 5 Kg + 1 Kg for small areas and patch repairs up to 20 Kg + 4 Kg and bulk supply for large projects. There is no formal minimum order — contact us for project-specific pricing.

Question 7

Can Xfloor coatings be applied in occupied facilities?

Accepted Answer

Yes. Xfloor Ultra-Build Epoxy (SYS-201) is a solvent-free, low-odour formulation specifically suitable for occupied or partially occupied facilities. Application can be phased to minimise operational disruption.

Question 8

What ESD standard does Xfloor ESD flooring meet?

Accepted Answer

Xfloor ESD Conductive (SYS-302) meets IEC 61340-5-1, with surface resistivity < 10⁶ Ω. Full grounding layout design is included with every ESD project specification — no other vendor provides this as standard.

Question 9

How do I become an Xfloor Applicator Partner?

Accepted Answer

Submit an application through our Applicator Programme page. Our Operations Manager will contact you within 48 hours to schedule a vetting call. Approved partners receive preferential pricing, technical training, and project lead referrals.

Question 10

How do I request a TDS or MSDS for a specific system?

Accepted Answer

All current technical documents are available on request from our technical team. Contact us and we will respond within 4 hours with the relevant TDS, MSDS, and application guides.

Frequently Asked Questions

Get a Price List & System Recommendation